Blog
Focus on agricultural spray
Blog
Use and maintenance of backpack manual sprayer
Summary: Proper use and maintenance of backpack spray can extend its service life and reduce maintenance costs. The precautions for use are introduced as follows.
Release time:
2025-12-31
Proper use and maintenance of backpack spray can extend its service life and reduce maintenance costs. The precautions for use are introduced as follows.
Precautions for use
When using it formally, add the medicine first and then the water, and ensure that the liquid level of the medicine does not exceed the safety water level line. Before spraying, pull the control lever more than 10 times to increase the air pressure inside the cylinder to the working pressure. Do not apply excessive force when pulling the control handle to prevent the air chamber from exploding.
During the initial filling process of the liquid medicine, due to the presence of clear water in the air chamber and spray bar, the concentration of the sprayed liquid medicine is relatively low during the first 2-3 minutes of spraying. Therefore, attention should be paid to re-spraying to avoid affecting the pest control effect.
After the work is completed, the remaining liquid medicine in the bucket should be poured out in a timely manner, rinsed with clean water, and drained. At the same time, check whether there is water accumulation in the gas chamber. If there is water accumulation, the water connector should be removed to release the water.
If the sprayer is not to be used in the short term, the main components should be cleaned, dried, and stored in a cool, dry place. If it is not to be used for an extended period, all metal parts should be coated with butter to prevent rust.
Common faults and troubleshooting methods
Common faults and troubleshooting methods during use include insufficient spray pressure and poor atomization. If the inlet ball valve is lifted by dirt, the inlet valve should be removed and the dirt cleaned off with a cloth; if the leather cup is damaged, a new one can be replaced; if the connection is not fitted with a sealing ring, or if there is air leakage due to a damaged sealing ring, a sealing ring can be added or replaced.
It cannot be sprayed as mist
If the inclined hole of the nozzle body is blocked by dirt, it can be cleared; if the spray hole is blocked, it can be disassembled for cleaning, but hard objects such as iron wires or copper needles should not be used to poke the hole to prevent the spray hole from expanding and the spray quality from deteriorating; if the filter screen inside the housing is blocked or the water valve ball is lifted, the filter screen should be cleaned and the dirt on the lifted ball should be cleaned off.
If the switch is leaking or cannot be turned, and if the switch cover is not tightened, the switch cover should be tightened; if the gasket on the switch core is worn, the gasket should be replaced; if the switch has been placed for a long time or used for an extended period, the switch core may become stuck due to chemical corrosion and cannot be turned. The parts should be removed and cleaned with kerosene or diesel; when it is difficult to remove, it can be soaked in kerosene for a while before being removed. Do not use hard objects to strike it.
If water leaks from each connecting part due to loose joints, tighten the nuts; if the gasket is not flat or damaged, ensure it is flat or replace the gasket; if the gasket shrinks and hardens due to drying, soften it with animal oil before use.
Next page:
Latest Blog
Unlock the Full Potential of Your Sprayer with a Telescopic Spray Lance
In the realm of agricultural machinery, the importance of effective spraying cannot be overstated. A Telescopic Spray Lance for Sprayer is an excellent tool that can significantly improve the way you apply pesticides, herbicides, and fertilizers. This adjustable lance allows you to reach greater heights and cover larger areas with precision, thus optimizing your spraying task. One of the key advan
2026-07-27
Telescopic Spray Lance: The Key to Sustainable Farming Practices
Introduction to Telescopic Spray Lances in Sustainable Farming Sustainable farming practices are becoming increasingly vital in today's world. Farmers are continually seeking innovative tools that can aid in crop management while minimizing environmental impact. One such tool that has gained significant attention is the **telescopic spray lance**. This versatile equipment allows for efficient appl
2026-07-26
Maximizing Agricultural Efficiency with Electrostatic Sprayers
Electrostatic sprayers are becoming increasingly popular in the agricultural sector due to their innovative design and ability to improve the efficiency of pesticide and nutrient application. These sprayers utilize electrostatic technology to ensure that droplets are charged, allowing them to adhere better to plant surfaces. This unique feature not only increases coverage but also reduces waste, l
2026-07-25
Why Battery Operated Sprayers Are Essential for Sustainable Farming
Why Battery Operated Sprayers Are Essential for Sustainable Farming Table of Contents Introduction to Battery Operated Sprayers What Are Battery Operated Sprayers? Benefits of Using Battery Operated Sprayers Environmental Impact Cost Efficiency Ease of Use Versatility in Applications Technological Advancements in Ba
2026-07-24
Understanding the Benefits of Brass Nozzles for Agricultural Sprayers
In the agricultural sector, efficiency and reliability are paramount, especially when it comes to applying pesticides or fertilizers. One crucial component that contributes to these objectives is the nozzle, specifically brass nozzles used in agricultural sprayers. Brass nozzles offer several advantages that make them an excellent choice for farmers and agricultural professionals. Firstly, brass
2026-07-23